FCAO-II Automatic free calcium oxide tester

Free calcium oxide (fCaO) is an important indicator to measure the quality of clinker. Accurate/rapid determination of fCaO in clinker is particularly important for cement quality control. This instrument uses the conductivity analysis method to determine the CaO content, which reduces the previous man-made titration errors and improves the accuracy of the measurement. The process of measuring the fCaO content takes only a few minutes to complete automatically, and automatically displays, automatically prints the test results, and alarms. The measurement time is shortened, the labor intensity is reduced, and the obvious advantages of quickness and convenience are shown, which has a positive and effective effect on the production quality.

Technical parameter:

1. Power supply: 220V ± 10% 50Hz

2. Motor: stepless speed regulation

3. Power: 500W

4. Working environment temperature: 5-40℃

5. Relative humidity of working environment: 50-85%

6. Time: 1-99 minutes (default 5 minutes)

7. Adjust temperature: 0-99℃ (default 80℃)

8. Temperature error: ±1℃

9. Conductivity type: DJS-1 platinum black electrode

10. Electrode constant: The constant is 1, and the range of 0.9-1.1 marked on the electrode is in the range of constant 1.

11. Measurement range: fCaO is within 4.0%, but more than 3.0% has exceeded the national standard

12. Quality: 5kg

13. Conductivity: 0-2000 μs/cm

14. Conductivity resolution: 1 μs/cm

15. Accuracy: 1μs/cm

16. Average heating rate: 5℃/min

Photo:

Ca-5 cement free calcium oxide rapid measuring instrument

Free calcium oxide is the main indicator of cement quality and clinker calcination thermal engineering system. The instrument uses ethylene glycol extraction benzoic acid direct titration method, under specific conditions, only 3 minutes to quickly and accurately determine the free calcium oxide content. It can be used in production control of cement plants, building materials, scientific research units, teaching in colleges and universities, etc.Technical Parameters:1. Motor: stepless speed regulation2. Accuracy: Standard deviation is 0.064%3. Extraction time: 3min4. Power supply voltage: 220V 50HZ5. Power: 300W6. Average heating rate: 60 ℃ / min

Photo: