Double Horizontal Shaft Concrete Mixer,lab scale concrete mixer

lab scale concrete mixer This mixer is mainly used to mix concrete in construction This mixer is mainly used to mix concrete in construction laboratory, it features easy operation, high efficiency, easy clean, it's ideal concrete lab mixing machine. 5L JJ-5 Laboratory Cement Mortar Mixer The Laboratory Concrete Mixer is used for preparing Mix Design of Concrete. The chamberof laboratory concrete mixer can be titled to any angle. This facilitates mixing and discharge. Blades are provided inside the chamberto mix the material thoroughly. NJ-160B cement paste mixer HJS-60 double horizontal shaft concrete mixerThe product structure has been included in the national industry mandatory standard-<Concrete Test Mixer> (JG244-2009). The product performance meets and exceeds the standard requirements. Due to the scientific and reasonable design, strict quality control and its unique structure, the double-shaft mixer has the characteristics of high mixing efficiency, more uniform mixture and cleaner discharge. This product is suitable for machine building materials or concrete laboratories such as scientific research institutes, mixing stations, and testing units.Technical Parameters:1. Construction type: double horizontal shaft2. Nominal capacity: 60L3. Power of stirring motor 3.0KW4. Power of tipping and unloading motor: 0.75KW5. Stirring material: 16Mn steel6. Leaf mixing material: 16Mn steel7. Distance between blade and chamber: 1mm8. Chamber thickness: 10mm9. Blade thickness: 12mm10.Dimensions: 1100 x 900 x 1050mm11.Weight: about 700kg 12.Mixing capacity：Under the condition of normal use, within 60 seconds the fixed quantity of concrete mixture can be mixed into homogeneous concrete. Operation and use 1.Connect the power plug to the power socket. 2.Switch on'air switch' , the phase sequence testing works. If the phase sequence errors ,' phase sequence error alarm' will alarm and lamp flashing. At this time should cut input power and adjust the two fire wires of the input the power.(note: cann't adjust the phase sequence in the equipment controller) if "phase sequence error alarm" don't alarm that phase sequence is correct, can be normal use. 3.Check whether the " emergency stop" button is open, please reset it if open (rotate according to the direction indicated by the arrow). 4.Put the Material to the mixing chamber, cover the upper cover. 5.Set mixing time (factory default is one minute). 6.Press the button 'mixing', mixing motor begins to work,reach to the setting time (factory default is one minute), machine stop working, finish mixing.If you want to stop in the process of mixing, can press the 'stop' button. 7.Take off the cover after mixing has stopped, place the material box at below center position of the the mixing chamber, and push the tight, lock the universal wheels of the material box. 8.Press the 'Unload' button,'unload' indicator light on at the same time.Mixing chamber turn 180 ° automatically stop, 'unload' indicator light is off at the same time, the most material is discharged. 9.Press the 'mixing' button,the mixing motor works, clear the residual material clean (need about 10 seconds). 10.Press the "stop " button, mixing motor stops working. 11.Press the 'reset'button,discharging motor running reversely, the 'reset' indicator light bright at the same time, the mixing chamber turn 180 ° and automatically stop, the 'reset' indicator light off at the same time. 12.Clean the chamber and blades to prepare mixing next time. Note: (1)In the machine running process in case of emergency, please press the emergency stop button to ensure the personal safety and avoid the damage of equipment. (2) When input the cement, sand and gravel,it is forbidden to mingle with the nails,iron wire and other metal hard objects, so as not to damage the machine. HP-4 Concrete Impermeability Tester