HJS-60Horizontal Forced Type Laboratory Concrete Mixer

Mixer is double shaft type, mixing chamber main body is double cylinders combination. To achieve satisfactory result of mixing, mixing blade is designed to be falciform, and with scrapers on both end sides blades. Each stirring shaft installed 6 mixing blades, 120 ° Angle spiral uniform distribution, and the stirring shaft Angle of 50 ° installation. Blades are overlapping sequence on the two stirring shafts, reverse outward mixing, can make the material to clockwise circulate at the same time of forced mixing, achieve the goal of mixing well. The installation of the mixing blade adopts the method of thread locking and welding fixed installation, guarantee tightness of blade, and also can be replaced after the wear and tear. Unloading is with 180 ° tilting discharge. Operation adopts the combination design of manual open and limit control. mixing time can be setted. Technical Parameters 1、 Mixing blade turning radius：204mm； 2、 Mixing blade rotate speed：outer 55±1r/min； 3、 Rated mixing capacity：（discharging）60L； 4、 Mixing motor voltage/power：380V/3000W； 5、 frequency：50HZ±0.5HZ； 6、 discharging motor voltage/power：380V/750W； 7、 Max particle size of mixing：40mm； 8、 Mixing capacity：Under the condition of normal use, within 60 seconds the fixed quantity of concrete mixture can be mixed into homogeneous concrete.